FREE CHIMNEY REPAIR QUOTE!  ยท  SAME DAY SERVICE!☎ 206-453-2045

HomeService AreasEverettChimney Sweep

Chimney Sweep in Everett, WA

Wood-fireplace sweeping for Everett, from Riverside brick flues to south Everett zero-clearance units. Sweep and inspection starting at $299.

  • Serving Everett & Snohomish County
  • Free 2nd-opinion quotes
  • Price match + 10โ€“25% discount

Free Chimney Sweep Quote in Everett

We'll confirm a time by phone or text.

Book your chimney service

Pick a day and an arrival window — it takes 30 seconds.

1 · Choose a day

2 · Choose a 3-hour arrival window

A chimney sweep in Everett is about one thing: getting the creosote and soot out of a wood-burning flue before the next burning season. In the older north Everett homes that usually means a tall brick flue, sometimes unlined, sometimes with clay tile, that has been burning wood since long before anyone thought about annual sweeping. Creosote builds in layers on rough brick and cracked tile faster than on a smooth liner, so these flues typically need more attention than a newer one. In south Everett the fireplace is more often a factory-built wood unit with a metal flue pipe, which sweeps faster but needs its cap, spark screen and pipe joints checked at the same time.

We sweep from the top and the bottom, run a camera up the flue, and show you what came out and what the flue looks like afterward. Our sweep and inspection starts at $299. Because Everett is about 45 minutes north of our Renton office, we schedule Snohomish County sweeps in blocks, so the best availability is when we are already in Mukilteo, Mill Creek or Marysville; ask and we will tell you the next day a truck is up there. Same-day is often possible. If you are not happy with how the job was done, we are not done.

Symptoms

Signs Everett homeowners notice

  • Black, flaky or shiny tar-like buildup visible inside the firebox or on the damper
  • Smoke rolling back into the room when the fire is going
  • A smoky campfire smell in the house when the fireplace is not in use
  • The fire is hard to start or burns sluggishly even with dry wood
  • Soot falling onto the smoke shelf or hearth after a fire
  • A full burning season has passed since the last sweep

Everett Conditions

Why this happens in Everett

Everett burns wood for a long season. Using the Sea-Tac 1991-2020 normals, the wet stretch from October through March carries about 29.65 inches of the year's 40.34 inches of rain, and the winter months average lows of 37-38F, which is cold and damp enough that fireplaces in Everett typically get used from the first fall storms into April. That is a lot of burn hours between sweeps, and in a pre-1940 north Everett brick flue, every cool, slow fire adds to the glaze.

The damp itself matters too. A flue that sits wet between fires, which is most of the ~150-156 days a year with measurable precipitation, lets creosote absorb moisture and bond harder to brick and tile, so sweeping an Everett chimney in the dry summer months (July normal is only 0.60 inches of rain) is typically easier and gets you a cleaner result than waiting for the first cold snap in November, the wettest month at 6.31 inches.

How It Works

Our chimney sweep process

1

Protect the room

Drop cloths from the door to the hearth, a sealed fireplace opening, and a HEPA vacuum running the whole time so dust stays out of your living room.

2

Inspect first

A visual check of the firebox, damper, smoke chamber and flue confirms a routine sweep is the right service.

3

Sweep the flue

We run brushes sized to your chimney, from the firebox up or from the top down depending on the system, to knock creosote and soot off the flue walls.

4

Clean the smoke chamber, shelf and damper

The smoke shelf collects most of the loose fall; we brush and vacuum it and the smoke chamber, then brush the damper so it seats properly.

5

Final check and walkthrough

We look up the flue again, vacuum the firebox, and show you what came out. Anything we noted, such as cracks or a missing cap, gets a free written quote.

Full details, options and pricing factors on the main Chimney Sweep page.

Need chimney sweep in Everett?

Call now or request a free quote โ€” we confirm by phone or text.

☎ 206-453-2045   Request a Quote

Questions

Chimney Sweep in Everett โ€” FAQ

When is the best time to get a chimney sweep in Everett?

Summer and early fall. July and August are the driest months of the year, the flue is dry so creosote comes off cleaner, and our Snohomish County schedule is open. By November, the wettest month, we are booking around the first cold snap. Sweep and inspection starts at $299 either way.

Our north Everett house has an old unlined brick chimney. Can it still be swept?

Yes, and it should be. Unlined brick holds creosote in every joint, so we sweep it with brushes sized to the flue and then run a camera to check for gaps, missing mortar or a flue that has lost tile. If the camera shows problems, we give you a free quote for repair or relining before you burn again.

How soon can you do chimney sweep in Everett?

We confirm a time by phone or text after you request a quote; same-day service is often available for urgent problems in Everett and the rest of Snohomish County.

Other services in Everett

Chimney Sweep nearby

☎ Call 206-453-2045