Home › Service Areas › Fife, WA
Chimney Repair, Sweep & Inspection in Fife, WA
Chimney sweeping, inspection and repair for homes in Fife and Milton, about 30 minutes south of our Renton shop by I-405 and I-5.
- Serving Fife & Pierce County
- Free 2nd-opinion quotes
- Same-day service often available
Request a Free Quote in Fife
We'll confirm a time by phone or text.
Seattle Chimney Repair Services repairs and sweeps chimneys in Fife, WA, ZIP codes 98354, 98424. We also cover Milton from the same route. Crews come from our Renton office, Sunday to Friday, 8 AM to 6 PM. A sweep and inspection is a flat $299. Crown repair runs $299 to $2,500, chase covers $299 to $1,500 and flashing repair $299 to $3,000, with a written quote before any work starts. Call 206-453-2045.
Fife sits on the flat floor of the Puyallup River valley between Tacoma and the Milton hill, with I-5 running straight through the middle of the city and the Port of Tacoma a short distance to the west. From our shop in Renton we take I-405 south to I-5 and follow it past Federal Way, which puts us at most Fife and Milton addresses in about half an hour off peak.
Much of Fife is warehousing and truck yards, so the houses cluster in a few pockets: postwar ranches near the old town center along Pacific Highway, 1990s and 2000s subdivisions toward the Milton line, and hillside streets in Milton that date from the 1960s onward. That mix means we see both brick masonry chimneys on the older ranches and framed chases with metal chase covers on the newer plats. Sweeps, chase cover replacement and crown repair are the usual calls.
Call 206-453-2045 or request a quote online and we confirm a time by phone or text. A sweep and inspection is a flat $299; repairs are quoted in writing after the inspection.
Services in Fife
Chimney & fireplace services in Fife, WA
Local Conditions
Chimney problems we see in Fife
Fife is low, flat and only a few miles from Commencement Bay, so the wind off the bay carries salt-laden marine air across the valley. That air keeps brick and mortar damp, and on older masonry chimneys the mortar joints and crown wash out faster. Valley fog and frost on clear winter nights add a freeze-thaw cycle that opens hairline cracks in crowns. On the newer framed chases, galvanized chase covers rust at the seams and around the storm collar, staining the siding before any leak shows inside. Up the hill in Milton the exposure is less about salt and more about tree cover, with moss on north-facing caps and shaded flashing that never fully dries.
Areas we cover
Areas we cover in Fife
We cover all of Fife in ZIP 98424, including Fife Heights on the slope above the valley, the streets around Fife City Hall and the Pacific Highway corridor, and the newer plats east toward 70th Avenue. Milton, ZIP 98354, is on the same route and gets the same pricing, from the Milton Way business strip up to the neighborhoods off Meridian and near Edgewood.We also cover Milton from the same route.
Neighborhoods & Scheduling
Scheduling & arrival in Fife
Fife and Milton are about 30 minutes from Renton and we route them with Tacoma, Puyallup and Federal Way calls, so they fit easily with other Pierce County stops. A sweep and inspection takes about an hour. If the inspection turns up a repair, we send a written quote before any work is scheduled.
Need a chimney sweep or repair in Fife?
Call now or request a free quote. We confirm every appointment by phone or text.
☎ 206-453-2045 Request a QuoteQuestions
Fife chimney service FAQ
Do you charge extra to come to Fife or Milton from Renton?
No. The sweep and inspection is a flat $299 in Fife and Milton, the same as in Renton. The drive down I-5 is about 30 minutes and is built into the price.
My chase cover in Fife is rusting. Is that the salt air?
Very likely. Fife sits in the Puyallup valley a few miles from Commencement Bay, and galvanized covers rust quickly in that damp marine air. Replacement with a stainless steel cover runs $299 to $1,500 depending on size and the number of pipes it has to fit around.
The mortar on my older Fife brick chimney is crumbling. Can it be repointed?
Usually yes, if the brick itself is sound. Tuckpointing runs $299 to $2,500 depending on how many joints need to be ground out and refilled. We check the crown at the same time, since a cracked crown is what lets water into the joints in the first place.
Does the Milton hill have different chimney problems than the Fife valley?
Somewhat. Milton's streets off Meridian have more tree cover and shade, so we see more moss on caps and flashing that stays wet. The valley floor in Fife gets more salt and fog. Both get the same $299 inspection.
Nearby service areas
Helpful reading