Home › Service Areas › Puyallup › Chimney Crown Rebuild
Chimney Crown Rebuild in Puyallup, WA
Crown rebuilds for Puyallup's older brick chimneys starting at $299, with a free quote and photos of the old crown.
- Serving Puyallup & Pierce County
- Free 2nd-opinion quotes
- Price match + 10–25% discount
Free Chimney Crown Rebuild Quote in Puyallup
We'll confirm a time by phone or text.
Puyallup's historic downtown and Victorian-era core have some of the oldest brick chimneys on our route, and the crowns on them are typically the original thin mortar wash or a patch over it. A crown that has cracked or lost its edge lets rain run straight down into the brick and the flue instead of shedding it clear. A crown rebuild removes the failed material, forms a new crown thick enough to last, slopes it away from the flue, extends it past the brick face with a drip edge, and seals it. South Hill's factory-built chases use a chase cover instead; if that is your setup, see chase cover replacement. Puyallup is about 35 minutes from Renton, so we can schedule around a dry forecast and return to check the cure.
Crown rebuild starts at $299. You get a free quote first, with photos of the existing crown so you can see why it needs replacing, a free second-opinion quote if someone already priced it, and price match plus 10 to 25 percent off. We use safe, green materials, we are certified and insured, and if you are not happy, we are not done. Call 206-453-2045, or book a chimney inspection if you are not sure the crown is the issue.
Symptoms
Signs Puyallup homeowners notice
- Pieces of concrete or mortar missing from the top edge of the chimney
- Cracks wide enough to see daylight or fit a coin into
- The crown is flat or dished in the middle so water pools on it
- No overhang: the slab ends flush with the brick faces
- The top two or three courses of brick are spalling or loose
- A previous crown sealant is peeling off and the cracks underneath have reopened
Puyallup Conditions
Why this happens in Puyallup
A downtown Puyallup crown has been hit by about 40.34 inches of rain a year for a very long time. Sea-Tac's NOAA normals show about 73 percent of that falling between October and March, and winter lows averaging just above freezing (37.1 F in December, 37.7 F in January). The region sees roughly 60 days a year that touch 32 F but only about 4 that stay frozen, so water in a crown crack typically freezes overnight and thaws by day over and over. The Brick Industry Association documents that moisture in saturated masonry expands on freezing and that repeated cycles cause cracking and spalling; on a crown that shows up as pieces breaking off the edge and the crack opening toward the flue.
Moss makes the shaded side worse. Regional guidance says Western Washington moss spreads fastest October through April on north-facing and tree-shaded surfaces that dry slowly, and the older Puyallup neighborhoods have mature trees. A mossy crown typically stays saturated for weeks, which is why the shaded side of an old Puyallup crown typically crumbles first.
How It Works
Our chimney crown rebuild process
Remove the failed crown
We break out the old slab or mortar wash down to solid brick, protecting the flue opening so debris does not fall into the chimney.
Repair the top courses
Any loose or spalled brick in the top courses is reset or replaced so the new crown sits on sound masonry.
Form with overhang and slope
We build a form that projects past the brick faces on all sides and slopes the surface away from the flue so water runs off instead of sitting.
Pour and finish
The crown is poured in a single placement with a bond break around the flue tile so heat expansion does not crack it, and a drip edge is formed on the underside of the overhang.
Cure and seal
Once cured, we apply a breathable water repellent and, where useful, a flexible sealant at the flue joint. A new cap goes on if the old one is damaged.
Full details, options and pricing factors on the main Chimney Crown Rebuild page.
Need chimney crown rebuild in Puyallup?
Call now or request a free quote — we confirm by phone or text.
☎ 206-453-2045 Request a QuoteQuestions
Chimney Crown Rebuild in Puyallup — FAQ
When should I schedule a crown rebuild in Puyallup?
Before the October rains if you can. Sea-Tac's June through August normals total only about 3 inches, so summer gives us the dry curing window a new crown needs. Puyallup is 35 minutes from Renton, so we can also fit a rebuild into a dry stretch during the wet season and return to check it. Call 206-453-2045.
Is my old downtown Puyallup crown repairable or does it need a full rebuild?
If the crown is sound with minor surface cracks, sealing is typically enough. If it is crumbling, missing its overhang, or cracked through to the flue, it needs a rebuild, starting at $299. Our free quote includes photos of the crown and an honest call on which one you need, with no pressure either way.
How soon can you do chimney crown rebuild in Puyallup?
We confirm a time by phone or text after you request a quote; same-day service is often available for urgent problems in Puyallup and the rest of Pierce County.
Other services in Puyallup
Chimney Crown Rebuild nearby